ISDN Digi Setup Help

Digi ISDN Adapter Card Setup Help

Line Configuration Options Help


Digi ISDN Adapter Card Setup Help

In the following fields, select the values that match your configuration.

IRQ Level

Set this field to an unused interrupt (IRQ). You must choose a value that's unique, that is, no other board or device can have the same IRQ level assigned to it. The most common levels are:

IRQ level	Used by
3	Standard serial ports COM2 and COM4, if present.
5	A secondary parallel printer port, if present.
7	A primary parallel printer port, if present.
I/O Base Address

If necessary, change the default setting to the port address you set the board's DIP switch to. See the Digi documentation for setting the I/O base address.

Memory Base Address

Select a memory base other than the default. If you don't know, ask your system administrator, or find an available 16K window through trial and error. If you choose a memory base through trial and error, start with the default, and then try address in the following order: 0xD80000, 0xC80000, 0xC40000, 0xCC000. If none of these works, try address in the 0xE0000 range (if available). If none of these address works, call Digi Technical Support.

Switch Type

Select the type of ISDN switch. The options are:

Type	Switch
AT&T	AT&T, 5ESS, and Generic 5E4.2 and up switches.
NTI	Northern Telecom, DMS-100, Functional, or BCS-29 and greater.
NT-1	National ISDN compatible.
Generic	Generic CCITT/ANSI.
Auto	Auto Detect. Select this type only if the switch is unknown.
Line Options

Click this button to configure your line options.


Line Configuration Options Help

Fill in the fields on this screen with information your ISDN service provider has supplied.

Line Number

Select the number of the line your Digi communicates through.

Enable Terminal Management

Check the box to enable this feature only if you've selected the AT&T switch type. If your line is terminal type B, C, or D, you need Terminal Management to issue and receive voice calls.

Number of Logical Terminals

Select 1 unless your system supports two logical terminals.

Fill in the following fields for Logical Terminal #1 if you selected 1 in the previous field, and for both terminals if you selected 2.

Service Profile ID

Type the number supplied by your service provider.

Phone Number

Type your telephone number.